WRAPFLASHING SA 160.58SF 11 3/4" X 164' ORANGE

WrapShield SA Self-Adhered WRB/Air Barrier membrane
protects the building envelope by allowing vapor to pass
through (breathable) but not air or liquid water mitigating costly
moisture damage and saving energy for the life of the building.

BASIC USE
WrapShield SA Self-Adhered is installed above grade behind
rain screen wall cladding assemblies.

MATERIALS
WrapShield SA Self-Adhered consists of multiple layers of
spun-bonded polypropylene fabric with a proprietary, fully
self-adhered pressure sensitive adhesive that allows for initial
re-positioning prior to rolling.

BENEFITS

• Superior building envelope protection – high drying capacity
  (50 perms) allows building materials to dry-out, reducing the
  risk of damage from moisture infiltration, mold, mildew and rot for the life of the building.
• Air tight barrier – stops air infiltration as per the ASTM E2357
• Air Barrier assembly test, ABAA approved.
• Consistent millage thickness – factory made rolled good
  ensures consistent properties and performance.
• Fully tested building envelope system – rough opening
  flashing accessories eliminate the need for untested outside
  components.
• Fully bonds without primer – to most substrates (excluding
  OSB). No primers are used or required for product installation.
• Simple installation – requires only basic tools, no specialized
  mobilizations or protection gear are required.
• Apply to clean and dry-to-the-touch “as new” substrates, no
  additional preparation is required.
• Spans substrate joint gaps up to 7/8” (22.2mm), eliminates
  need for tapes and fillers.
• Phase construction ready, install in below freezing
  temperatures, non-directional installation, sustains up to 180
  days UV and climate exposure prior to cladding installation.
  Emits zero VOCs, contains no Red List Chemicals, ensuring
  crew safety and a healthy building